How to Make Zipper Pockets on Pants
Adding zipper pockets to pants can be a great way to personalize your wardrobe and provide practical storage for small items. Whether you’re a beginner or an experienced sewer, creating your own zipper pockets can be a fun and rewarding project. In this article, we’ll guide you through the process of how to make zipper pockets on pants, step by step.
Materials Needed
Before you start, gather the following materials:
– Pants fabric
– Zipper (the length should be slightly longer than the width of the pocket)
– Matching thread
– Scissors
– Pins
– Sewing machine
– Iron and ironing board
Step 1: Measure and Cut the Fabric
First, measure the width and length of the pocket you want to create. Add a seam allowance (usually 1/2 inch) to these measurements. Cut two pieces of fabric to the desired size, ensuring they are the same dimensions.
Step 2: Prepare the Zipper
Open the zipper and place it on a flat surface. Measure the length of the zipper and mark the center point. Place one of the fabric pieces on top of the zipper, aligning the marked center point with the center of the fabric. Pin the fabric in place.
Step 3: Sew the Zipper to the Fabric
Using a zipper foot on your sewing machine, sew the fabric to the zipper. Start from the bottom of the zipper and sew up to the top, leaving the zipper pull open. Backstitch at the beginning and end of the seam to secure it.
Step 4: Attach the Second Fabric Piece
Place the second fabric piece on top of the zipper, ensuring it is aligned with the first piece. Pin the fabric in place and sew along the edges, leaving a small opening for turning the pocket right side out.
Step 5: Turn the Pocket Right Side Out
Using a pointed object, such as a chopstick or a knitting needle, push the corners of the pocket out to create a neat shape. Trim any excess thread and press the pocket with an iron.
Step 6: Attach the Pocket to the Pants
Place the pocket on the pants where you want it to be attached. Pin the pocket in place, ensuring it is aligned with the waistband or side seam. Sew the pocket to the pants using a zigzag stitch to create a strong bond.
Step 7: Add the Zipper Pull
Thread the zipper pull through the slider and secure it in place. Make sure the zipper is fully closed before proceeding.
Step 8: Final Touches
Press the pocket with an iron to ensure it lies flat against the pants. Trim any excess thread and enjoy your new zipper pocket on your pants!
Now that you know how to make zipper pockets on pants, you can customize your wardrobe and add a touch of personal style. Happy sewing!
