How to Add Inside Pockets to a Jacket
Adding inside pockets to a jacket can not only enhance its functionality but also add a touch of elegance and practicality. Whether you’re a fashion enthusiast or a DIY enthusiast, this guide will walk you through the process of adding inside pockets to a jacket, step by step.
Materials Needed:
Before diving into the process, gather the following materials:
– A jacket with a pocket opening already present
– Fabric for the pocket lining (matching the jacket fabric)
– Matching thread
– Scissors
– Measuring tape
– Pins
– Sewing machine (optional)
Step 1: Measure and Cut the Lining Fabric
Start by measuring the dimensions of the existing pocket opening on the jacket. Add a little extra space to account for seam allowances. Cut the lining fabric to the desired size, ensuring it’s slightly larger than the pocket opening.
Step 2: Pin the Lining Fabric to the Jacket
Place the lining fabric on the inside of the jacket, aligning it with the pocket opening. Pin the fabric in place, ensuring it’s centered and the edges are even.
Step 3: Sew the Lining Fabric to the Jacket
Using a matching thread, sew the lining fabric to the jacket, leaving a small opening for turning. Make sure to backstitch at the beginning and end of the seam to secure it.
Step 4: Turn the Lining Fabric Right Side Out
Carefully turn the lining fabric right side out through the small opening you left earlier. Use a pointed object, like a chopstick or a knitting needle, to push out the corners and create a smooth, even pocket.
Step 5: Press the Lining Fabric
Press the lining fabric with an iron to remove any wrinkles and ensure it lies flat against the jacket.
Step 6: Topstitch the Lining Fabric
Topstitch around the pocket opening, securing the lining fabric in place. This step is optional but recommended for a polished finish.
Step 7: Add Pocket Flaps (Optional)
If you want to add pocket flaps, cut two pieces of fabric to the desired size. Pin and sew the flaps to the top of the pocket, ensuring they are even and centered. Topstitch the flaps in place for a finished look.
Step 8: Final Touches
Now that your inside pockets are in place, give your jacket a final inspection. Make sure everything is even and the pockets are securely attached. Trim any excess thread and enjoy your newly upgraded jacket with practical inside pockets.
By following these simple steps, you can add inside pockets to a jacket, making it more functional and stylish. Happy sewing!
