How to Replace Rear Wiper on 2017 Ford Explorer
Replacing the rear wiper on a 2017 Ford Explorer is a task that most car owners can handle on their own, provided they have the right tools and follow the correct steps. This article will guide you through the process, ensuring that you can safely and effectively replace your vehicle’s rear wiper blade.
Before You Begin
Before diving into the replacement process, it’s essential to gather the necessary tools and materials. You will need a flat-head screwdriver, a Phillips-head screwdriver, a wiper blade replacement kit that is compatible with your 2017 Ford Explorer, and a rag or towel for cleaning. Make sure to read the instructions that come with the replacement kit, as the process may vary slightly depending on the specific blade you are using.
Step 1: Park Your Vehicle on a Flat Surface
Start by parking your 2017 Ford Explorer on a flat and level surface. Turn off the engine and set the parking brake to prevent the vehicle from rolling. This will ensure that you have a stable and safe environment to work in.
Step 2: Remove the Rear Wiper Arm
Locate the wiper arm on the rear window of your Ford Explorer. The arm is typically attached to the window by a small clip or pin. Using a flat-head screwdriver, gently pry the clip or pin to release the arm from the window. Once the arm is loose, carefully pull it away from the window.
Step 3: Remove the Old Wiper Blade
With the wiper arm removed, you will see the old wiper blade attached to the arm. Most blades have a locking mechanism that secures them in place. Use the flat-head screwdriver to release the locking mechanism, then gently pull the blade away from the arm.
Step 4: Install the New Wiper Blade
Take the new wiper blade from the replacement kit and position it on the wiper arm. Make sure that the blade is aligned with the locking mechanism on the arm. Once aligned, push the blade onto the arm until the locking mechanism clicks into place.
Step 5: Reattach the Wiper Arm
Now that the new wiper blade is installed, reattach the wiper arm to the rear window. Line up the arm with the clip or pin and gently push it back into place. Make sure the arm is securely attached before moving on to the next step.
Step 6: Test the New Wiper Blade
Start your 2017 Ford Explorer and turn on the rear wiper function. Observe the new wiper blade as it moves across the rear window. The blade should move smoothly and cover the entire surface of the window without skipping or leaving streaks. If the blade does not perform as expected, double-check the installation and make any necessary adjustments.
Conclusion
Replacing the rear wiper on a 2017 Ford Explorer is a straightforward process that can be completed in about 15-20 minutes. By following these steps and using the right tools, you can ensure that your vehicle’s rear window stays clear and clean, even during inclement weather. Remember to regularly check and replace your wiper blades to maintain optimal visibility and safety on the road.
