How to Put 2014 Ford Explorer in 4 Wheel Drive
The 2014 Ford Explorer is a versatile and powerful vehicle, capable of handling various terrains with ease. One of its standout features is the ability to switch between two-wheel drive and four-wheel drive. This capability allows the Explorer to maintain traction and stability on slippery or uneven surfaces. In this article, we will guide you through the process of putting your 2014 Ford Explorer in 4 wheel drive.
Step 1: Park the Vehicle on a Level Surface
Before you begin, ensure that your 2014 Ford Explorer is parked on a level surface. This will help prevent any damage to the vehicle while you switch to four-wheel drive.
Step 2: Turn Off the Engine
For safety reasons, it is essential to turn off the engine before attempting to switch to four-wheel drive. This will prevent any unexpected movements or damage to the vehicle.
Step 3: Locate the Transfer Case Lever
The transfer case lever is typically located on the driver’s side floor, near the shifter. It may be labeled as “4WD,” “4WD AUTO,” or “4WD LOCK.” The exact location and labeling may vary depending on the model of your 2014 Ford Explorer.
Step 4: Switch to 4 Wheel Drive
To put your 2014 Ford Explorer in 4 wheel drive, follow these steps:
1. Engage the parking brake to prevent the vehicle from rolling.
2. Locate the transfer case lever and pull it towards you until you hear a click.
3. The lever will now be in the 4WD position. If your vehicle has a 4WD AUTO setting, you can leave it there for automatic engagement in slippery conditions.
4. If you want to engage 4WD LOCK, pull the lever all the way back until you hear another click. This mode locks the front and rear axles together, providing maximum traction.
Step 5: Start the Engine
Once the transfer case lever is in the desired position, start the engine. The vehicle is now in 4 wheel drive and ready to tackle challenging terrains.
Step 6: Test the 4 Wheel Drive System
Before driving off, it is a good idea to test the 4 wheel drive system. Accelerate gently and observe how the vehicle responds to different driving conditions. If everything seems to be working correctly, you can proceed with your journey.
Step 7: Return to 2 Wheel Drive (Optional)
When you are done driving in 4 wheel drive, you can return your 2014 Ford Explorer to 2 wheel drive. To do this, simply reverse the steps outlined above. Make sure to engage the parking brake and turn off the engine before making any adjustments to the transfer case lever.
In conclusion, putting your 2014 Ford Explorer in 4 wheel drive is a straightforward process that can be completed in just a few simple steps. By following the guidelines provided in this article, you can ensure that your vehicle is always ready to handle whatever challenges the road may present.
