Science Explained‌

How to Properly Check Your 2020 Ford Explorer’s Transmission Fluid- A Step-by-Step Guide

How to Check Transmission Fluid on 2020 Ford Explorer

Regularly checking your 2020 Ford Explorer’s transmission fluid is essential for maintaining the health and performance of your vehicle’s transmission system. The transmission fluid serves multiple purposes, including lubricating the moving parts, cooling the transmission, and preventing wear and tear. By following these simple steps, you can easily check the transmission fluid level and ensure your vehicle is running smoothly.

Here’s how to check the transmission fluid on your 2020 Ford Explorer:

  1. Locate the Transmission Fluid Dipstick: The transmission fluid dipstick is typically located near the engine oil dipstick. Look for a dipstick with a bright yellow handle or a sticker indicating it’s for the transmission fluid.
  2. Remove the Dipstick: Carefully pull the dipstick out of its tube. Make sure to clean the dipstick with a rag or paper towel to remove any residual fluid before reinserting it.
  3. Check the Fluid Level: Insert the dipstick back into the tube and remove it again. Look at the tip of the dipstick to check the fluid level. The transmission fluid should be at the full mark or between the high and low marks. If the fluid is below the low mark, it’s time to add more fluid.
  4. Inspect the Fluid Condition: While checking the fluid level, take a moment to inspect the condition of the fluid. It should be a bright red or amber color and have a smooth, creamy texture. If the fluid is dark, gritty, or has a burnt smell, it may be time for a transmission fluid change.
  5. Check for Leaks: Look for any signs of leaks around the transmission fluid pan, seals, and gaskets. If you notice any fluid on the ground, it’s important to have it checked by a professional as soon as possible.

Remember, it’s crucial to follow the manufacturer’s recommended intervals for changing your 2020 Ford Explorer’s transmission fluid. Typically, this should be done every 30,000 to 50,000 miles or as advised by your vehicle’s owner’s manual. Regular maintenance will help extend the life of your transmission and prevent costly repairs in the future.

By following these steps, you can ensure that your 2020 Ford Explorer’s transmission fluid is at the proper level and in good condition, keeping your vehicle running smoothly and efficiently.

Related Articles

Back to top button