How to Stretch Woven Field Fence
Woven field fences are a popular choice for agricultural and residential properties due to their durability and versatility. Whether you’re installing a new fence or repairing an existing one, stretching the woven fence properly is crucial for its longevity and effectiveness. In this article, we will guide you through the process of how to stretch woven field fence, ensuring that your fence remains strong and functional for years to come.
Step 1: Gather the Necessary Tools and Materials
Before you begin stretching the woven field fence, make sure you have all the necessary tools and materials on hand. You will need:
– Woven field fence panels
– Fence posts
– Post hole digger
– Shovel
– Trowel
– Post anchor or concrete
– Level
– Hammer or mallet
– Wire cutters or fence pliers
– Gloves and safety goggles
Step 2: Prepare the Posts
Start by preparing the fence posts. Dig post holes at the desired spacing, typically 8 to 10 feet apart for woven field fences. The depth of the holes should be at least 2 feet, and the width should be wide enough to accommodate the post anchor or concrete. Place the post anchor or concrete in the bottom of the hole and position the post on top of it. Use the level to ensure the post is plumb and make any necessary adjustments.
Step 3: Install the Posts
Once the posts are in place and level, secure them with the appropriate fasteners. If using concrete, wait for it to cure according to the manufacturer’s instructions before proceeding. If using a post anchor, tighten the anchor to hold the post securely in place.
Step 4: Attach the Fence Panels
Now it’s time to attach the woven field fence panels to the posts. Begin by sliding the fence panel onto the top rail of the first post. Make sure the panel is centered and straight. Secure the panel to the post using the provided fence pliers or wire cutters. Repeat this process for each panel, ensuring that they are evenly spaced and properly aligned.
Step 5: Stretch the Fence Panels
To stretch the woven field fence, start at one end of the fence and work your way to the other. Hold one end of the panel and pull it gently but firmly towards the next post. As you pull, use the hammer or mallet to gently tap the panel into place. Continue stretching and tapping the panel until it is tight and taut against the post. Repeat this process for each panel, ensuring that the entire fence is evenly tensioned.
Step 6: Secure the Fence Panels
Once the fence panels are stretched and taut, secure them to the posts using the provided fence pliers or wire cutters. Make sure the panels are tight and properly aligned before securing them.
Step 7: Inspect and Adjust
After stretching and securing the fence panels, take a moment to inspect the entire fence. Check for any gaps, loose panels, or uneven tension. Adjust as necessary by gently pulling or tapping the panels into place.
Conclusion
By following these steps, you can successfully stretch woven field fence, ensuring a strong and durable barrier for your property. Remember to take your time and work carefully to achieve the best results. With proper installation and maintenance, your woven field fence will serve you well for years to come.
